DAD3241 Automatic Dicing Saw

DAD3241 Automatic Dicing Saw

DAD3241 Automatic Dicing Saw

Your inquiry was submitted successfully. You can expect to hear from us shortly.

Standard manual dicing saw for Φ8-inch workpieces

  • Φ200 mm
  • Single spindle

High productivity

Improved throughput through the introduction of servo motors on all axes (X, Y, and Z)

Existing equipment (DAD3240) DAD3241
X-axis 600 800
Y-axis 170 200
Z-axis 80 80


The index accuracy has been improved by installing a Y-axis scale as a standard specification. In addition, DAD3241 includes software function enhancement, communication control through PC electric component installation, measurement accuracy improvement, and measurement time reduction using the high-speed, high-accuracy NCS (Non-Contact Setup).

Support for large workpieces

Installation of a JIG chuck table makes processing square workpieces up to 8 x 8 inches possible (option).

High processability

Thanks to the high-output 1.8 kW spindle, the DAD3241 can handle difficult-to-cut materials from silicon to ceramics.

Compact manual dicing saw

The DAD3241 is a distinctly compact manual dicing saw with support for Φ8-inch workpieces at a width of only 650 mm.

High maintainability

Built-in microscope with a lens shutter and scope blow function reduces maintenance frequency, which increases the utilization rate.

Ease of operation

  • XIS(Extended Interface System)
    Operation buttons are consolidated on the microscope screen.
  • Wafer mapping
    The processing status is displayed visually in the same way as fully automatic equipment.
  • Log viewer
    Analog data is displayed in a graph and equipment data is more easily visualized.
  • Help viewer
    Troubleshooting is displayed when an error occurs to achieve quick and accurate recovery support.
Wafer mapping
Wafer mapping
Log viewer
Log viewer
Help viewer
Help viewer


Specification Unit
Max. workpiece size - Φ8 inch (200 mm × 200 mm user-specified specification)
X-axis Cutting range mm 210
Cutting speed mm/s 0.1~800
Y-axis Cutting range mm 210
Index step mm 0.0001
Index positioning accuracy mm 0.002/210
(Single error) 0.002/5
Z-axis Max. stroke mm 32.2
Moving resolution mm 0.000002
Repeatability accuracy mm 0.001
θ-axis Max. rotating angle deg 320
Spindle Rated output kW 1.8 at 60,000 min-1
Rated torque N・m 0.29
Rotation speed range min‐1 6,000 ~ 60,000
Equipment dimensions(W×D×H) mm 650 × 950 × 1,670
Equipment weight kg Approx.550

*Product appearance, features, specifications, and other details may change due to technical modifications.
*Please read the standard specification sheet thoroughly before use.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like

More from DISCO

Recently viewed