2Z-HVS-100 MEMS High Vacuum Sealer

Unitemp Germany SKU: 2Z-HVS-100
Unitemp Germany 2Z-HVS-100 2 zone MEMS high vacuum sealer with getter activation - Nano Vacuum Australia & New Zealand

2Z-HVS-100 MEMS High Vacuum Sealer

Unitemp Germany SKU: 2Z-HVS-100
Your inquiry was submitted successfully. You can expect to hear from us shortly.

2 Zone High Vacuum Sealer for sealing of  MEMS-Packagings under high vacuum

(up to 10exp.-6 hPa) with high reliability hermetically sealing. The electronic component can be processes before sealing in 2 heating zones with different temperatures up to 450 °C. This allows also the getter activation. There can be processed 6 packagings in parallel (maximum 6 adapters each with 14mm diameter).

The ramp up rate is significant with 35 K/min in vacuum. The PID controller allows the storage of up to 20 programs with 100 steps each. The USB interface allows the easy programming and storage of unlimited programs. The process data can be recorded and saved as   .csv or .xls data. 

A key feature is the automatic positioning and sealing of the parts, whereas both parts must have the same temperature. The control of different heat-up ramp rates and/or ramp-down rates has been a huge task which was solved excellent.

The open construction behind glass allows a continuous monitoring/viewing of the process. 

The electrical connection is  3,2 kW (230V AC, 1 phase)  and can be attached to a standard power socket.
Water cooling is strictly required for operation.

The small dimension with  200 x 500 x 470 mm (WxHxD) and the small weight of 23,5 kg makes the system very compact and allows the placement on a small laboratory table.
This system is perfect for small series and prototype production and is a low cost solution in comparison to other production systems.
 

Technical Data

  • 2 heated regions, each with Ø 100 mm and 6 component adaptors
  • Chamber height 100 mm
  • Temperature range bottom heater: up to 450 °C, top heater: up to 200 °C
  • bottom heater optional up to 600 °C
  • Ramp up rate 35 K/min (in vacuum)
  • Ramp down rate 25 K/min (in vacuum)
  • Vacuum capable up to 10exp.-6 hPa incl. pump, gate valve and vacuum measurement
  • Interface USB incl. software UniSoft
  • Controller HVS-2604 (20 programs storable, each with 100 steps)
  • Dimensions 200 x 500 x 470 mm (WxHxD)
  • Weight 23,5 kg
  • Voltage 230 V AC 1 Phase
  • Frequency 50-60 Hz
  • Current max. 16A
  • Connected load 3,2 kW

Options and accessories:

  • HVS-TC: Additional thermocouple to measure on device; for external measurement tool
  • WC I: Closed loop water cooling system (stand alone)



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like

More from Unitemp Germany

Recently viewed