CONFIGURABLE AND COMPACT TABLETOP MASKLESS ALIGNER WITH RASTER SCAN AND VECTOR EXPOSURE MODULES
The tabletop µMLA system is state-of-the-art in maskless technology built on the renowned µPG platform – the most sold tabletop maskless system worldwide. It is a perfect entry-level research and development (R&D) tool for virtually any application requiring microstructures. Typical examples are microfluidics (cell sorting devices, lab-on-a-chip), small-scale mask-writing, micro-optics and microlens arrays, sensors, MEMS, contacting 2D materials and fan-out electrodes, etc.
The µMLA is a flexible and customizable tool, and offers two exposure modes. The standard µMLA uses the Raster Scan Exposure Mode for exposures, which is fast and provides excellent image quality and fidelity, while the write time is independent of structure size of pattern density. The optional Vector Scan Mode is designed for patterning continuous smooth curves such as waveguides in a faster and more accurate way. Three optical setups offer a choice of variable resolution and throughput. Each allows easy switching between different resolution and speed configurations to optimize exposure for a given application. The Draw Mode enables straightforward ad-hoc modifications to existing structures and electrical contacts to nanowires or 2D materials. The grayscale exposure mode allows the creation of complex 2.5 structures such as micro-optical devices. With its small footprint, the µMLA fits on a regular table.
TECHNICAL DATA
| Write Mode I * | Write Mode II * | Write Mode III * | |
|---|---|---|---|
| Writing performance (Raster Scan Exposure Module) | |||
| Minimum structure size [μm] | 0.6 | 1 | 3 |
| Minimum lines and spaces [μm] | 0.8 | 1.5 | 3 |
| Address grid [nm] | 20 | 50 | 100 |
| CD uniformity [3σ, nm] | 200 | 300 | 400 |
| 2nd layer alignment over 5 x 5 mm² [nm] | 500 | 500 | 1000 |
| 2nd layer alignment over 50 x 50 mm² [nm] | 1000 | 1000 | 2000 |
| Write speed | with 390 nm LED / 365 nm LED | with 390 nm LED / 365 nm LED | with 390 nm LED |
| Write speed | 10 mm²/min at 0.6 µm | 40 mm²/min at 1 µm | 130 mm²/min at 3 µm |
| Optional write speeds at different minimum structure sizes with “Variable Resolution for Raster Scan Exposure Module” | 18 mm²/min at 1 µm | 60 mm²/min at 2 µm | 160 mm²/min at 4 µm |
| 25 mm²/min at 2 µm | 90 mm²/min at 4 µm | 300 mm²/min at 6 µm | |
| Writing performance (Vector Mode Exposure Module) | |||
| Minimum feature size [µm] | 0.6 | 1 | 3 |
| Address grid [nm] | 20 | 20 | 20 |
| 2nd layer alignment over 5 x 5 mm² [nm] | 500 | 500 | 1000 |
| 2nd layer alignment over 50 x 50 mm² [nm] | 1000 | 1000 | 2000 |
| Maximum linear write speed in Vector Mode | 200 mm/s | 200 mm/s | 200 mm/s |
| Available spot sizes in Vector Mode [µm] | 0.6 / 1 / 2 / 5 / 10 | 1 / 2 / 5 / 10 / 25 | 3 / 5 / 10 / 25 /50 |
| System specifications | |||
| Maximum substrate size | 6″ x 6″ | ||
| Minimum substrate size | 5 x 5 mm2 | ||
| Substrate thickness | 0.1 to 12 mm | ||
| Maximum write area | 150 x 150 mm2 |
| Raster scan exposure module | Vector exposure module | |
|---|---|---|
| Light source | LED; 390 nm or 365 nm | Laser; 405 nm and/or 375 nm |
| System dimensions (lithography unit) | ||
| µMLA | Width x Depth | Height x Weight |
| Main system housing | 640 mm (25") x 840 mm (33") | 530 mm (21") x 130 kg (285 lbs) |
| Installation requirements | ||
| Electrical | 230 VAC / 6A or 110 VAC / 12A (±5%, 50/60 Hz) | |
| Compressed air | 6 - 10 bar | |
| Cleanroom | ISO 6 recommended | |
| Temperature stability | ±1 °C | |
| * Only one write mode can be installed on the system |
Please note
Specifications depend on individual process conditions and may vary according to equipment configuration. Write speed depends on pixel size and write mode. Design and specifications are subject to change without prior notice.
DOWNLOAD FACTSHEET
You may also like
More from Heidelberg Instruments
Recently viewed