Programmable precision pressure transmitters with hygienic diaphragm sensor
PSM-2 Pressure transmitter
- Measurement range 1-35 bar absolute and gauge
- All welded flush steel diaphragm pressure sensor
- 4-20 mA, 0-10 VDC and setpoint switch output
- Programmable settings and configuration with S4-Connect™
- Hygienic 316 stainless steel design
ADVANTAGES
- Chemical and corrosion resistant 316 stainless steel diaphragm
- All-welded flush sensor design (No internal O-rings)
- Integrated flange cooling section
- High accuracy 0.1% of span (BFSL)
- USB programmer for easy configuration and setup
- Temperature drift compensated
- Configurable with S4-Connect™ USB programmer
- Robust 316 stainless-steel design
- IP67 enclosure for harsh environments
- Optional solid-state setpoint relay for process control
The PSM-2 series programmable pressure transmitter is designed for gas, vapor and liquid measurement in pharmaceutical, food, beverage, and biotechnology applications. The transmitter is compatible with the temperature and chemical exposure used in industrial standard CIP (Clean-in-place) and SIP (Steam-in-place) cleaning processes.
The PSM-2 is programmable and configurable from PC via the novel S4-Connect™ interface.
Sensor technology
The PSM-2 is based on a stainless steel 316L diaphragm that converts the applied pressure to an electric signal. The sensor diaphragm is flush with the flange and has a surface roughness RA value of less than 0.38 µm. The flush sensor diaphragm enables use in applications with pressure media with high viscosity that can clog small sensor cavities. The sensor element uses an internal FDA approved filling fluid to transfer the pressure from the sensor diaphragm to the piezo sensor element.
It is available either as an absolute sensor that measures relative to an integrated sealed reference vacuum or as a gauge sensor that measures relative to the ambient pressure.
APPLICATIONS
- Food and beverage processing
- Sterilization processes SIP and CIP
- Water treatment and supply
- Chemical processing
- Biotechnology
- Hydrostatic level measurement
Download brochure here
PSM-2 PRESSURE TRANSMITTER SPECIFICATIONS
Specifications |
|
Measuring range (0 bar to full-scale)
|
1, 1.6, 2, 2.5, 4, 5, 6, 10, 16, 20, 25 or 35 bar
|
Measuring range (0 bar to full-scale)
|
15, 20, 30, 50, 100, 200, 250 or 500 psi
|
Measuring principle
|
Piezo with stainless steel membrane absolute
|
Accuracy, IEC 61298-2
|
+/- 0.1 % BFSL
|
Thermal drift (offset)
|
+/- 0.15% of full-scale
|
Output signal (Voltage version)
|
0-10 VDC (Programmable scaling by S4-Connect™)
|
Output resolution (Voltage version)
|
16 bit / 150 nV
|
Output signal (Current version)
|
4-20 mA(1) (Programmable scaling by S4-Connect™)
|
Output resolution (Current version)
|
16 bit / 244 nA
|
Solid state relay contact rating (optional)
|
250 mA, 50 VDC / VAC peak
|
Environment conditions |
|
Operating ambient temperature
|
-40 to +100 °C (-40 to +212 °F)
|
Media temperature
|
-50 to +150 °C (-58 to 302 °F)
|
Storage ambient temperature
|
-40 to +125 °C (-40 to +257 °F)
|
Maximum media pressure
|
See PSM-2 pressure limits specifications
|
Burst media pressure
|
See PSM-2 pressure limits specifications
|
Mounting position
|
Any
|
Protection rating, EN 60529/A2:2013
|
IP67 (2), IP65 (3)
|
Humidity, IEC 68-2-38
|
98%, non-condensing
|
Power supply |
|
Supply voltage
|
12-30 VDC
|
Power consumption (Voltage version)
|
240 mW (Max)
|
Power consumption (Current version)
|
600 mW (Max)
|
Reverse polarity protection
|
Yes
|
Overvoltage protection
|
Yes
|
Internal fuse
|
100 mA (Thermal recoverable)
|
Materials |
|
Enclosure
|
SS 1.4404 / AISI 316
|
Electrical connector DIN 175301-803A
|
PA Nylon
|
Electrical connector M12 IEC 61076-2-101
|
PA Nylon, Nickel plated Zinc alloy
|
Process connection
|
SS 1.4404 / AISI 316L
|
Process leak tightness (ISO 27895:2009)
|
<1·10-9 mbar·l/sec.
|
Approvals |
|
CE
|
EN61000-6-2, EN 61000-6-3Pressure directive 97/23/CE
|
RoHS compliance
|
Directive EU 2015/863
|