- 3D Metrology
- Lithography - Direct Write
- Leak Detectors
- MEMS High Vacuum Sealers
- Portable Cleanrooms
- Rapid Thermal Annealing Ovens
- Reflow Solder Systems
- Residual Gas Analyzer
- Solvent Purification
- Surface Science
- Thin Film Materials
- Wire & Die Bonders
- THz-TDS Characterisation
NanoVac offers a wide range of thin film deposition materials including pellets, pieces, sputter targets and wire.
All our materials are tested using ICP-OES chemical analysis and manufactured under ISO9001:2008 certification.
Materials are vacuum packed under cleanroom conditions to ensure zero contamination.
If your size, quantity or purity is not available please contact us for a personalised quotation.
Thin Film Materials
Indium Gallium Tin Oxide [InGaZnO4] (In2O3/Al2O3/ZnO) 65/16/19 wt% Sputter Target used for Magnetron Sputtering Physical Vapour Deposition.Various diameters,...
Indium Tin Oxide [ITO] Sputter Target used for Magnetron Sputtering Physical Vapour Deposition. Composition is (In2O3/SnO2 90/10 WT%). Custom compositions...