ADVANTAGES
- Class AA accuracy
- 4-20 mA programmable current output0-10 VDC programmable voltage output
- Robust 316 stainless steel design
- IP67 enclosure for harsh environments
- Fast response to temperature changes
- Compact and low mass sensor probe
- Optional solid-state setpoint relay for process control
- Dual sensor design
The TDM-1 series temperature transmitter is designed for gas and liquid measurement in a variety of industrial applications. Its modular compact design offers a unique combination of high measurement performance, flexible configuration and a robust stainless steel design.
Temperature sensor technology
Traditional temperature measurement is based on thermistor, thermocouple or RTD sensors. The TDM-1 is based on semiconductor diode junction sensor technology. The sensor technology offers high measurement accuracy and repeatability in combination with a fast response to temperature changes.
The novel dual sensor probe design offers two individually calibrated sensors for improved measurement stability and redundancy in critical applications.
APPLICATION
- Food and beverage processing
- Sterilization process SIP and CIP
- Water treatment and supply
- Oil and gas
- Wind turbines
- HVAC installations
- Chemical processing
- Hydraulic oil
- Engine gearbox oil
- Plastic molding
Download brochure here
TDM-1 TEMPERATURE TRANSMITTER SPECIFICATIONS
Specifications |
|
|
Measuring range
|
-50 to +150 °C (-58 to +302 °F)
|
|
Accuracy
|
+/- 0.1 °C (Class AA, DIN 60751)
|
|
Measuring principle
|
Dual semiconductor diode junction
|
|
Sensor probe diameter
|
Ø3.0 mm (0.12 inch)
|
|
Sensor probe length
|
15-140 mm (0.59 to 5.51 inch)
|
|
Output signal (Voltage version)
|
0-10 VDC (Programmable scaling with S4-Connect™)
|
|
Output resolution (Voltage version)
|
16 bit / 150 nV
|
|
Output signal (Current version)
|
4-20 mA(1) (Programmable scaling with S4-Connect™)
|
|
Output resolution (Current version)
|
16 bit / 244 nA
|
|
Solid state relay contact rating (optional)
|
250 mA, 50 VDC / VAC peak
|
Environment conditions |
|
|
Operating ambient temperature
|
-40 to +100 °C
|
|
Media temperature
|
-50 to +150 °C
|
|
Storage ambient temperature
|
-40 to +125 °C
|
|
Maximum media pressure (2)
|
200 bar / 2,900 PSI / 20 MPa
|
|
Mounting position
|
Any
|
|
Protection rating, EN 60529/A2:2013
|
IP67 (3), IP65 (4)
|
|
Humidity, IEC 68-2-38
|
98%, non-condensing
|
Power supply |
|
|
Supply voltage
|
12-30 VDC
|
|
Power consumption (Voltage version)
|
240 mW (Max)
|
|
Power consumption (Current version)
|
600 mW (Max)
|
|
Reverse polarity protection
|
Yes
|
|
Overvoltage protection
|
Yes
|
|
Internal fuse
|
100 mA (Thermal recoverable)
|
Materials |
|
|
Enclosure
|
SS 1.4404 / AISI 316
|
|
Electrical connector DIN 175301-803A
|
PA Nylon
|
|
Electrical connector M12 IEC 61076-2-101
|
PA Nylon, Nickel plated Zinc alloy
|
|
Process connection
|
SS 1.4404 / AISI 316L
|
|
Process leak tightness (ISO 27895:2009)
|
<1·10-9 mbar·l/sec.
|
Approvals |
|
|
CE
|
EN61000-6-2, EN 61000-6-3Temperature directive 97/23/CE
|
|
RoHS compliance
|
Directive EU 2015/863
|
- 4-20 mA NAMUR NE43 compliant signal.
- Please consult with Sens4 application support (email: support@sens4.com) to select the best option for the application. An assessment of stresses induced by fluid flow might be needed (following the guidelines of ASME PTC 19.3 TW – 2016).
- IP67 for product versions with IEC 61076-2-101 M12 connector.
- IP65 for product versions with DIN EN 175301-803 A connector.
You may also like
More from SENS4
More from Vacuum and Pressure Measurements
Recently viewed