NanoFrazor Scholar Thermal Scanning Probe Lithography

Heidelberg Instruments SKU: NANOFRAZOR Scholar
NANOFRAZOR-Scholar-Nano Vacuum Australia and New Zealand

NanoFrazor Scholar Thermal Scanning Probe Lithography

Heidelberg Instruments SKU: NANOFRAZOR Scholar
Your inquiry was submitted successfully. You can expect to hear from us shortly.

THERMAL SCANNING PROBE LITHOGRAPHY TOOL WITH IN-SITU IMAGING AND GRAYSCALE PATTERNING CAPABILITIES

The NanoFrazor Scholar is particularly suitable for academic research groups requiring an affordable system for nanofabrication. NanoFrazor Scholar is used for nanopatterning of quantum devices on 1D/2D materials such as quantum dots, Dolan bridges and Josephson junctions, and nanoscale arrays. Its unique capabilities enable new devices in new materials. For example, it is used for advanced applications such as grayscale photonics devices, nanofluidics structures or biomimetic substrates for cell growth; local modification of materials by heat, e.g. chemical reactions and physical phase changes.

In-situ imaging enables two unique features: markerless overlay, and comparison of the written and target patterns during writing so the parameters can be immediately adjusted. This approach, called closed-loop lithography, results in sub-2 nm vertical precision for 2.5D (grayscale) shapes of any complexity. Fast and precise control of a heated nanoscale tip enables innovation not otherwise feasible.

The technology behind the system is the result of more than 20 years of intensive research and development (R&D) that started at IBM Research Zürich and now takes place at Heidelberg Instruments Nano. The NanoFrazor hardware and software are constantly advancing to extend the capabilities and performance of the tool and its range of applications. Our dedicated team of experts continues to develop and optimize the pattern transfer processes for different applications. We compile this know-how in a growing library of best practices and protocols to support our customers.

Thermal Scanning Probe Lithography

New approach to nanopatterning enabling applications not otherwise feasible

High-resolution

Easy patterning of nanostructures even with complex geometries; Min. lateral features 20 nm, Vertical resolution 3 nm

Non-invasive Lithography

No damage from charged particles; no proximity effects; clean lift-off

Compatibility

With all standard pattern transfer methods: lift-off, etching, etc – knowledge resource and best practices available in our “Recipe Book”

Unique Thermal Cantilevers

Integrated microheater and distance sensor; easy to exchange and economical

Precise Overlay and Stitching

Markerless overlay and stitching accuracy 25 nm specified, sub-10 nm overlay shown

In-situ Imaging

Immediate control of patterned structures

Extremely Compact

50 cm x 45 cm x 40 cm

Low Cost of Ownership

No need for cleanroom, vacuum pump or expensive consumables

Grayscale Mode

2.5D lithography for patterning photonic, nanofluidic and biomimetic structures with 3 nm accuracy

Glovebox

Customized solution in collaboration with MBraun ensures minimized vibrations

For additional information please download the Fact Sheet or contact us at Nano Vacuum Australia & New Zealand.

Writing performance
Minimum structure size [nm] 20
Minimum lines and spaces [half pitch, nm] 30
Grayscale / 3D-resolution (step size in PPA) [nm] 3
Writing field size [X μm x Y μm] 50 x 50
Field stitching accuracy (markerless, using in-situ AFM imaging) [nm] 50
Overlay accuracy (markerless, using in-situ AFM imaging) [nm] 50
Write speed (typical scan speed) [mm/s] 0.5
Write speed (50 nm pixel) [μm²/min] 500
Imaging performance
Lateral imaging resolution (feature size) [nm] 10
Vertical resolution (topography sensitivity) [nm] 0.2
Imaging speed (@ 50 nm resolution) [μm²/min] 500

System features
Substrate sizes 1 x 1 mm² to 50 x 50 mm², 0 – 20 mm thickness (100 x 100 mm² possible with limitations)
Optical microscope 3.6 μm optical resolution, 1.5 mm x 1.1 mm field of view
Magnetic cantilever holder Fast (< 1 min) and accurate tip exchange
Housing Compact housing with separate controller rack, active vibration isolation (small footprint) or passive vibration isolation (slightly better performance) included.
Software features GDS and bitmap import, AFM image analysis and drawing for overlay, fully automated calibration routines, Python scripting
NanoFrazor cantilever features
Integrated components Tip heater, topography sensor, electrostatic actuation
Tip geometry Conical tip with < 10 nm radius and 750 nm length
Tip heater temperature range e 25 °C – 1100 °C (< 1 K setpoint resolution)
System dimensions & installation requirements
Height × width × depth 50 cm x 32 cm x 30 cm
Weight 100 kg
Power input 1 x 110 or 220 V AC, 10 A
Gas input Compressed air (> 4 bar) for passive vibration isolation
Vibration and noise level Ambient acoustic noise levels need to be kept below 40 dB for best performance. A strong table is required if the active vibration isolation is chosen. Floor requires vibration level VC-B.
Other considerations
Recipe book with detailed descriptions of various processes is included (regularly updated with software).
Cantilever tips degrade over time (> 50 h patterning possible). Exchange is fast and low cost for tool owners.
A cleanroom or special laboratory is not required. No vacuum needed.
Unique capabilities make it easy to receive government funding (for system itself or later research projects)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like


Recently viewed