NanoFrazor Explore Thermal Scanning Probe Lithography

Heidelberg Instruments SKU: NANOFRAZOR Explore
NanoFrazor Explore Thermal Scanning Probe Lithography - Nano Vacuum Australia & New Zealand
NanoFrazor Explore Thermal Scanning Probe Lithography - Nano Vacuum Australia & New Zealand
NanoFrazor Explore Thermal Scanning Probe Lithography - Nano Vacuum Australia & New Zealand
NanoFrazor Explore Thermal Scanning Probe Lithography - Nano Vacuum Australia & New Zealand
NanoFrazor Explore Thermal Scanning Probe Lithography - Nano Vacuum Australia & New Zealand
NanoFrazor Explore Thermal Scanning Probe Lithography - Nano Vacuum Australia & New Zealand
NanoFrazor Explore Thermal Scanning Probe Lithography - Nano Vacuum Australia & New Zealand
NanoFrazor Explore Thermal Scanning Probe Lithography - Nano Vacuum Australia & New Zealand
NanoFrazor Explore Thermal Scanning Probe Lithography - Nano Vacuum Australia & New Zealand

NanoFrazor Explore Thermal Scanning Probe Lithography

Heidelberg Instruments SKU: NANOFRAZOR Explore
Your inquiry was submitted successfully. You can expect to hear from us shortly.

Hybrid Direct Laser Sublimation and Grayscale Patterning Capability

NanoFrazor Explore is the first commercial thermal scanning probe lithography tool. NanoFrazor Explore is used for nanopatterning of quantum devices on 1D/2D materials, such as quantum dots, Dolan bridges and Josephson junctions, and nanoscale arrays. Its unique capabilities enable new devices in new materials. For example, it is used for advanced applications such as grayscale photonics devices, nanofluidics structures or biomimetic substrates for cell growth; local modification of materials by heat, e.g. chemical reactions and physical phase changes.

With the direct laser sublimation module, nano- and microstructures are now seamlessly and quickly written into the same resist layer in a single fabrication step. In-situ imaging enables two unique features: markerless overlay, and comparison of the written and target patterns during writing, so the parameters can be immediately adjusted. This approach, called closed-loop lithography, results in sub-2 nm vertical precision for 2.5D (grayscale) shapes of any complexity. Fast and precise control of a heated nanoscale tip enables innovation not otherwise feasible.

The technology behind the system is the result of more than 20 years of intensive research and development (R&D) that started at IBM Research Zürich, and now happens at Heidelberg Instruments Nano. The NanoFrazor hardware and software are constantly advancing to extend the capabilities and performance of the tool and its range of applications. Our dedicated team of experts keeps developing and optimizing the pattern transfer processes for different applications. We compile this know-how in a growing collection of best practices and protocols to support our customers.

For additional information please download the Fact Sheet or contact us at Nano Vacuum Australia & New Zealand.

Product Highlights

High-resolution

Easy patterning of nanostructures even with complex geometries; min. lateral features 15 nm, Vertical resolution 2 nm

Thermal Scanning Probe Lithography

New approach to nanopatterning enabling applications not otherwise feasible

Non-invasive Lithography

No damage from charged particles, no proximity effects, clean lift-off

Compatibility

With all standard pattern transfer methods: lift-off, etching, etc – knowledge resource and best practices available in our “Recipe Book”

In-situ Imaging

Immediate control of patterned structures

Precise Overlay and Stitching

Markerless overlay and stitching accuracy 25 nm specified, sub-10 nm overlay shown

Unique Thermal Cantilevers

Integrated microheater and distance sensor; easy to exchange and economica

Laser Sublimation Module

High-throughput exposure of coarse structures in the same exposure step; 405 nm wavelength CW fiber laser

Compact

1.85 m x 0.78 m x 1.28 m

Vibration Isolation

Three-layer acoustic and superior vibration isolation (> 98% @ 10 Hz)

Low Cost of Ownership

No need for cleanroom, vacuum pump or expensive consumables

Available Modules

Grayscale Software Module

3D patterning at <2 nm vertical resolution

Decapede Module

10-tip write head for 10-fold increase in throughput fo high-resolution patterning

Glovebox Integration

Customized solution in collaboration with MBraun ensures minimized vibrations for work in controlled environments


Writing performance thermal Probe Writing direct Laser Sublimation
Minimum structure size [nm] 15 600
Minimum lines and spaces [half pitch, nm] 25 1000
Grayscale / 3D-resolution (step size in PPA) [nm] 2 -
Writing field size [X μm x Y μm] 60 x 60 60 x 60
Field stitching accuracy (markerless, using in-situ AFM imaging) [nm] 25 300
Overlay accuracy (markerless, using in-situ AFM imaging) [nm] 25 100
Write speed (typical scan speed) [mm/s] 1 5
Write speed (thermal Probe: 50 nm pixel, incl. imaging) [μm²/min] 1000 100 000
Imaging performance
Lateral imaging resolution (feature size) [nm] 10 10
Vertical resolution (topography sensitivity) [nm] 0.2 0.2
Imaging speed (50 nm pixel) [μm²/min] 1000 1000

System features
Substrate sizes 1 x 1 mm² to 100 x 100 mm², 0 – 20 mm thickness (150 x 150 mm² possible with limitations)
Optical microscope 0.6 μm optical resolution, 1.0 mm x 1.0 mm field of view, autofocus
Laser source and optics 405 nm wavelength CW fiber laser, up to 150 mW output power on sample, 1.2 µm minimum focal spot size
Real-time laser autofocus Using the distance sensor of the NanoFrazor cantilever
Magnetic cantilever holder Fast (< 1 min) and accurate tip exchange
Housing Three-layer acoustic isolation, superior vibration isolation (> 98% @ 10 Hz) PC-controlled temperature and humidity monitoring, gas-flow regulation
Software features GDS and bitmap import, 0.1 nm address grid, 256 grayscale levels, AFM image analysis and drawing for overlay, mix & match between tip and laser writing, fully automated calibration routines, Python scripting
NanoFrazor cantilever features
Integrated components Tip heater, topography sensor, electrostatic actuation
Tip geometry Conical tip with < 10 nm radius and 750 nm length
Tip heater temperature range 25 °C – 1100 °C (< 1 K setpoint resolution)
System dimensions & installation requirements
Height × width × depth 185 cm x 78 cm x 128 cm
Weight 650 kg
Power input 1 x 110 or 220 V AC, 10 A
Gas input Compressed air and/or nitrogen with > 4 bar
Other considerations
Recipe book with detailed descriptions of various processes is included (regularly updated with software)
Cantilever tips degrade over time (> 50 h patterning possible). Exchange is fast and low cost for tool owners.
A clean room or special laboratory is not required. No vacuum needed.
Multi-tip extension (optional add-on for Explore system) is scheduled for beta site testing in mid-2020.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like


Recently viewed